Posts for tag: dental implants
It’s a common problem for denture wearers: after years of a comfortable fit, your dentures now seem to be uncomfortably loose. The reason, though, may have more to do with bone loss than the dentures.
Bone is a living tissue with a life cycle — it forms, it ages, and it eventually dies and dissolves (resorbs). It’s replaced with new bone and the cycle repeats. Additionally, the forces generated when we bite or chew are transmitted from the teeth to the jaw, which helps stimulate new bone growth. When the natural teeth are missing, however, the bone no longer receives this stimulus. Resorbed bone isn’t replaced at a healthy rate, which leads over time to bone loss.
Denture construction can also contribute to bone loss. The denture palate rests for support on the bony ridges that once held the teeth. Over time the compressive forces of the dentures apply damages and reduces the volume of gum tissue and eventually does the same to the bone. Combining all these factors, the reduced gum and bone volume will eventually alter the denture fit.
There are a few alternatives for correcting loose dentures. One is to reline them with new plastic, as either a temporary fix performed during an office visit or a more permanent relining that requires sending your dentures to a dental lab. Depending on the rate of bone loss, a patient could go through several denture relinings to accommodate ongoing changes in the jaw. At some point, though, it may be necessary to create a new set of dentures.
A third alternative that’s becoming increasingly useful is to incorporate dental implants into the denture design. Implants can of course be used to replace individual teeth, but a few strategically placed implants (usually of smaller dimension) can serve as a support platform for a removable denture. This relieves some of the compression force of a traditionally worn denture and can slow bone loss.
If you’re having problems with your denture fit, call us for an appointment. We’ll help you decide on the best alternative to improving the fit and making your dentures more comfortable and secure.
If you would like more information on refitting loose dentures, please contact us today to schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Loose Dentures.”
While many people still consider dental implants the "new kids on the block" in dental restoration, they're now in their fourth decade of use. And since their inception implant technology has continued to improve and revolutionize how we replace missing teeth.
Implants are a different "species" compared to other restoration methods. To be precise, an implant is a tooth root replacement—usually a titanium metal post imbedded directly into the jaw bone. Titanium is not only a biocompatible metal, but bone cells naturally grow on its surface to create a strong and durable hold. It's this secure hold that's most responsible for implants' high long-term success rate.
But we should also credit some of this success to the steady stream of advances over the years in implant construction and supporting technologies. For one thing, we're now more accurate and precise with implant placement thanks to advances in computer tomography (CT) and cone beam CT (CBCT) scanning.
These digital processes merge a series of images taken by a special camera to form a three-dimensional model of the jaw. We can manipulate this model on a computer monitor to view it from different vantage points. It can help us locate and avoid anatomical structures like nerves and sinuses when determining where to place a future implant. CT and CBCT are especially useful when there's a concern about adequate available bone, a necessity for stable implants.
Technology has also improved how we create surgical guides, often used during implant surgery to obtain the most accurate results. Surgical guides are custom-made devices that fit over the teeth with the drilling locations for the implants marked on them. Recent advances in 3-D printing have made these guides even more accurate so that they fit more securely in the mouth. This greater stability increases their accuracy during the drilling sequence during surgery.
These and other advances are helping ensure every implant is a success story. The end result is both a functional restoration and a beautiful smile.
If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “How Technology Aids Dental Implant Therapy.”
For generations, dentures have helped people avoid the dire consequences of total teeth loss. Now, implant technology is making them even better.
Composed of life-like prosthetic teeth fixed within a plastic or resin gum-colored base, dentures are manufactured to fit an individual patient’s mouth for maximum fit, comfort and performance. But dentures also have a critical drawback—they can’t stop bone loss in the jaw.
Bone is constantly regenerating as older cells dissolve and then are replaced by newer cells. In the jawbone, the forces generated when we chew travel through the teeth to the bone and help stimulate this new cell growth. When teeth are missing, though, the bone doesn’t receive this stimulus and may not regenerate at a healthy rate, resulting in gradual bone loss.
Dentures can’t transmit this chewing stimulus to the bone. In fact, the pressure they produce as they rest on top of the gums may actually accelerate bone loss. Over time then, a denture’s once secure and comfortable fit becomes loose.
In the past, most patients with loose dentures have had them relined with new dental material to improve fit, or have new dentures created to conform to the changed contours of the jaws. But implant technology now offers another alternative.
Implants are in essence a tooth root replacement. Dentists surgically implant a titanium metal post directly into the jawbone that naturally attracts bone cells to grow and adhere to it over time (a process called osseointegration). This not only creates a secure and lasting hold, it can also stop or even reverse bone loss.
Most people know implants as single tooth replacements with a porcelain crown attached to the titanium post. But a few strategically placed implants can also support either removable or fixed dentures. Removable dentures (also called overdentures) usually need only 3 or 4 implants on the top jaw and 2 on the bottom jaw for support through built-in connectors in the dentures that attach to the implants. A fixed bridge may require 4-6 implants to which they are permanently attached.
There are pros and cons for each of these options and they’re both more expensive than traditional dentures. In the long run, though, implant-supported dentures could be more beneficial for your bone health and hold their fit longer.
First introduced in the 1980s, dental implants are a popular and reliable tooth replacement option. Numerous studies show that after ten years 95% are still in place. Much of this success owes to the implant’s titanium post imbedded directly into the jaw, which then attracts bone growth. This additional growth securely anchors the implant in place for an unrivaled durability among other replacement options.
Still, a small percentage of implants fail — some in the first few months and others after a few years. Here are 3 reasons why, and how you can overcome them.
Poor bone quantity and quality. Implants need a certain amount of existing bone to succeed. Sometimes, though, there isn’t enough because prolonged absence of a tooth causes bone loss around the empty socket. Conditions like diabetes, osteoporosis or tobacco use can also compromise bone health. It’s often possible to increase bone volume with grafting, especially right after tooth extraction.
Teeth grinding habits. This occurs when you unconsciously grind or clench your teeth, usually during sleep. The habit can create forces far in excess of what’s normal when we bite or chew and can damage or even break the crown attached to an implant. Besides reducing stress (a major factor for teeth grinding), you can also alleviate the abnormal force generated by wearing a night guard.
Periodontal (gum) disease. Although your implants are impervious to disease or infection, supporting gums and bone aren’t. Plaque, a film of food and bacteria that builds up on tooth surfaces, can cause gum disease that weakens the supporting tissues (gums and bone) of the implant. This can give rise to a specific condition with implants known as peri-implantitis where the infected gum tissues and bone around it deteriorate, leading to the implant’s catastrophic loss. To avoid this, practice consistent daily hygiene, including around the implant. And see us regularly for checkups and cleanings, or as soon as possible if you see signs of gum problems.
If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implants: A Tooth-Replacement Method that Rarely Fails.”
While there’s usually a period of months between implant placement and the permanent crown, a new technique known as same-day tooth replacement installs both the implant and a temporary crown during the same visit. But be advised — it does have its risks and isn’t for everyone.
Successful same-day replacements require special attention during the three phases for implants: the removal (extraction) of the existing tooth; placement of the implant in the bone; and attachment of the crown, the visible tooth, to the implant. The tooth extraction lays the foundation for the entire process; the extraction procedure must be performed carefully to avoid undue damage to the socket. In addition, if infection or disease has compromised the site, an implant may not be possible immediately.
The implant must then be placed in the bone so that it’s stable and immovable. All implants stabilize with time as the bone grows and adheres to them, but we need greater stability for a same-day tooth replacement when an extraction is performed.
Our last consideration is positioning the implant so that the attached crown blends in naturally with the surrounding gum tissue and adjacent teeth. We must place it at the proper depth below the gum tissues so that the crown appears to emerge from them in the proper tooth length.
Taking extra care during all these phases, including the angle of crown attachment, will increase our chances of success. We still run a risk of implant damage or failure, however, from biting forces before the implant fully integrates with the bone. This means avoiding chewy foods and other situations that might increase the force on the implant. We may also use a temporary crown that’s slightly shorter than adjacent teeth so it won’t make full contact with the opposing tooth.
If you’d like to know if you’re a good candidate for a same-day tooth replacement, see us for a detailed examination. After reviewing your needs, we’ll be able to discuss with you the risks and benefits for a new look in one day.
If you would like more information on same-day tooth replacement, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Same-Day Tooth Replacement with Dental Implants.”